EZShoot 3-in-1 Rifle Light Review — 1600 Lumens, Green Laser, and IR for Under $90

If you run a rifle or SMG indoors, you need a light. If you run night games, you need a laser. If you do both, you need both — and the PEQ-style units that combine them start at $300 and climb fast. The EZShoot 3-in-1 sits at $88.99 on Amazon and claims to give you a 1600-lumen white light, a visible green laser, and an IR laser in one metal housing. Ed tested it on camera in his full unboxing and review. Here is what it actually does well, where it falls short, and whether it belongs on your platform.

What You Get

The EZShoot 3-in-1 arrives in a single box with everything you need to mount it:

• Main unit — full metal housing, 115 × 52 × 31 mm, 260 g. IPX6 waterproof rating. Feels solid in the hand; no flex or rattle.
• Magnetic USB-A charging cable — plugs into the rear of the unit. The connector locks with a quarter-turn, so it will not yank free mid-game.
• Pressure switch — low-profile tail switch with a Picatinny bracket. You can also remove the bracket and adhesive-mount the switch directly to your handguard.
• Dual mounting hardware — two sets of screws: one for Picatinny, one for M-Lock. Both are included. You do not need to buy anything extra to mount this on either rail system.
• Adjustment tools — hex wrenches for windage/elevation on both the visible and IR lasers, plus a CR2032 battery for the visible laser.

The dial on top works like a PEQ selector: 100% white light, 50% white light, 30% white light, visible laser, IR laser. You can run light-only, laser-only, or light + laser together. Double-tap the side button for strobe.

The Light — 1600 Lumens in Practice

Ed turned it on in his studio and the reaction was immediate: “Wow, it’s bright.” At 1600 lumens, this is not a dim tactical light pretending to be useful. It throws enough white light to clear a room, identify targets across a 50-foot indoor space, and over-power ambient light in a hallway.

The three brightness settings (100%, 50%, 30%) matter more than you think. Full power is too much for close-quarters work — it washes out your target at five meters and kills your own night-adapted vision. The 30% setting is the one you want for CQB: enough to see your target without blowing out your retinas when you transition from a dark corridor to a lit room.

The side switch is responsive. Click for constant on, hold for momentary. Ed specifically called out the switch speed as a strength: “This is a very responsive switch.” If you have used budget lights with a half-second delay between press and beam, you know how bad that feels in a firefight. The EZShoot does not have that problem.

The Lasers — Green Visible and IR

The visible laser is green, which is easier to pick up in daylight than red. It shares the same lens housing as the white light, so your laser and your beam are always pointing at the same thing. Windage and elevation adjustments are separate from the IR laser, so you can zero each independently.

The IR laser is offset to the side of the main housing. It has its own adjustment screws. If you run night vision, this gives you an aiming point without broadcasting your position to anyone without NV. Note: this is an IR laser only, not an IR illuminator. A real PEQ-15 puts out both an IR laser and a wide IR flood. The EZShoot gives you the laser pointer but not the flood. For airsoft, where engagement distances are short, the laser alone is usually enough. For anyone running NVGs at distance, you will still need a separate IR illuminator.

Mounting — Picatinny and M-Lock, No Compromise

This is where the EZShoot separates itself from most budget light/laser combos. The included hardware lets you mount the main unit on Picatinny or M-Lock without buying an adapter. The pressure switch also comes with both Picatinny and M-Lock brackets.

Ed mounted it on the WELLPRO WE23 Gauntlet — a minigun platform that has Picatinny rails on top and M-Lock slots on the sides. He ran the main unit on top and the pressure switch on the grip, and the dual-mount hardware made both positions possible without modification.

For a standard AEG or GBBR, you can run the unit on a top Picatinny rail and the switch on a side M-Lok slot, or vice versa. The flexibility matters because not every platform gives you a clean Picatinny run for both the light and the switch.

What It Does Not Do

Three things the EZShoot 3-in-1 does not give you:

1. No IR illuminator. You get an IR laser, not an IR flood. If you need to paint a wide area with infrared light for NVGs, this unit will not do it. You need a separate IR illuminator or a real PEQ-15/PEQ-2 equivalent at five times the price.
2. No built-in battery. The unit charges via the magnetic USB cable, which means you cannot swap cells in the field. If it dies mid-game, you are done until you recharge. Plan your charge schedule accordingly.
3. The pressure switch bracket is functional but not refined. Ed removed the Picatinny bracket from the switch and planned to adhesive-mount it directly to his grip. The bracket works, but it adds bulk. If you want a clean install, plan on double-sided tape.

Price and Value

At $88.99 with a 4.5-star rating across 80 Amazon reviews, the EZShoot 3-in-1 undercuts every PEQ-style alternative by at least $200. The closest functional equivalent — a Streamlight or Modlite light plus a separate laser — costs more and requires two separate mounts. The EZShoot gives you light, visible laser, and IR laser in one package with one set of mounting hardware.

Ed’s summary on camera: “I think it’s going to be a good one, guys. Very affordable compared to spending $300, $400 on the equivalent, and it’s giving you pretty much all of the function other than that IR beam.”

Who Should Buy This

• CQB and indoor players who need a light and laser on the same platform without spending $300+.
• Night game regulars who want an IR laser for NVG use without buying a real PEQ.
• Anyone running M-Lok handguards who has been frustrated by light/laser combos that only offer Picatinny mounting.

Who Should Look Elsewhere

• NVG users who need IR flood. This unit gives you a laser pointer, not an illuminator. If you need to light up a whole room through NVGs, you need something else.
• Players who want hot-swappable batteries. The internal battery charges via USB. No field swaps.
• Anyone who needs a pistol-mounted light. This is a rifle/SMG unit. For pistol lights, look at the TrustFire GM36L review instead.

Bottom Line

The EZShoot 3-in-1 does three things for under $90 that most competitors charge $300+ to do separately: white light, visible laser, and IR laser in one metal housing with dual Picatinny/M-Lok mounting. The switch is fast, the build is solid, and the brightness settings give you real CQB utility. The missing IR illuminator and non-swappable battery are the trade-offs. For most airsoft players running indoor or night games, those trade-offs are acceptable. For NVG-heavy milsim, you will want a dedicated IR flood to pair with it.

Watch the full review on 6mm Badger.